Maccor, Inc. designs and manufactures
fully programmable automated multiple station
secondary (rechargeable) and primary cell test
systems, programmable electronics to sink and
source current, Frequency Response Analysers,
and cell formation equipment to name a few.
Systems can be easily customized with voltages
up to 480VDC and currents ranging from 300nA to
2000 Amps. If you do not see something that meets
your needs, contact us with your requirements.
There is a good chance we can build it.
Since 1986, the source for battery and cell test
equipment. With equipment in operation in 40 countries
around the world, Maccor in our market has delivered
more test positions than all competitors combined!
Two main products have been specifically
designed to reach this market segment, the Series
3600 and the Series
3650. These products
combine function and density to provide an affordable
solution to meet the increasing demands of primary
tests.
Maccor's formation equipment consists of
256 cell position modules. Each formation system
can have from one to eight modules yielding 2,048
position cell formation systems.
The Frequency Response Analyzer performs
frequency scans from sub milliHertz frequencies
to 30kHz with extremely accurate readings at low
impedances. The EDA 0356 with its multiplexer
make it the perfect addition to an existing Maccor
test system for the serious user, or use it as
a stand-alone Frequency Response Analyzer.
Maccor's 32-bit software is both powerful
and easy to use. Meeting all your testing needs
is simple. In the event Maccor's standard software
does not meet your needs, custom features and
options may be purchased.
System options may be purchased with the
test system or in most cases added in the field
by a Maccor field service engineer. System options
include: Reference Voltage Inputs, Thermocouple
Inputs, Thermistor Inputs, Pressure Sensor Inputs,
LED Status Indicators, SMBus Reading Capability,
Digital Inputs, Digital Outputs, External Charge
Controllers, External Discharge Controllers, Telecom
Pulsing, and Sub-millisecond Pulsing.
A wide range of accessories are available
to enhance the use of your Maccor system, from
a UPS that ensures no data is lost during a power
outage to a selection of cell holders and cables
offering you a range of user interfaces
As the Maccor authorized agents for Europe
CellCare Technologies provide a full service and
calibration service as well as technical support
on your Maccor system.
The EDA 0305 Frequency Response Analyzer
is the right system at the right price for measuring
low impedances devices. In no time at all, the
EDA 0305 Frequency Response Analyzer will become
one of the most valuable research tools in your
laboratory. Designed primarily for use in AC impedance
evaluation of batteries, super capacitors, or
any where the accuracy of low impedance values
is essential >More.
This
8 channel unit is intended for bench top mounting,
typically for use in small research laboratories
and other applications requiring a small number
of test channels at relatively low current and
voltage. The Model 2300 can be used for 3 electrode
measurements, with or without the thermocouple
option >More.
The multifunction SERIES 3600 primary cell test
system has been engineered to meet the growing
demands of existing and upcoming ANSI and IEC
test standards. Each test position: Operates independently
of the other positions; Can be user programmed
to run a wide range of multi step tests, including
pulse tests; Can be user programmed to operate
in steps of fixed current, fixed power, fixed
voltage, fixed resistance; Has a dynamic range
of over 25,000 to 1 to meet ANSI and IEC standards
of current, power and resistance >More.
The multifunction SERIES 3650 primary cell test
system has been engineered to meet the growing
demands of existing and upcoming ANSI and IEC
tests. Each test position: Operates independently
of the other positions; Can be user programmed
to run a wide range of multi step tests, including
pulse tests; Can be user programmed to operate
in steps of fixed current, fixed power, fixed
voltage, fixed resistance; Has a dynamic range
to ANSI and IEC standards of current / power /
resistance of over 25,000 to 1.>More.
A
family of automatic battery test systems based
upon the same hardware components and software
operating system. Within this series Maccor offers
different system configurations to provide the
customer with a choice of size, features and cost.
All Series 4000 systems are multi-channel, computerised,
and capable of fully automatic testing. Using
the Maccor Windows TM based software, an almost
unlimited variety of test programs can be performed,
to provide extensive information on battery performance.
The Series 4000 test systems are an essential
tool for research, development and quality control
for all types of batteries
>More.
This
unit can be configured from 1 - 8 channelis and
is intended for bench top mounting, typically
for use in small research laboratories and other
applications requiring a small number of test
channels at currents up to 120A and voltages up
to 10V. The Model 4300 can be used for 3 electrode
measurements, with or without the thermocouple
option >More.
This
4 channel unit is intended for bench top mounting,
typically for use in small research laboratories
and other applications requiring a small number
of test channels at relatively low current and
voltage.>More.
The multifunction
SERIES 4600/4650 secondary cell test systems have
been engineered to provide high capabilities for
large scale single cell testing. Each test position:
Operates independently of the other positions;
Can be user programmed to run a wide range of
multi step tests; Can be user programmed to operate
in steps of constant current, constant power,
constant voltage, or constant resistance.
>More.
These systems are designed for
use in the formation / production testing process
of Lithium / Ni-Cd / Ni-MH cells. Each system
is specifically built to meet the customer's needs
in terms of cell production rate, type, size and
configuration of cell, and the level of automation.
This system operates under a dedicated Microsoft
Windows TM based software program specifically
written by Maccor for these systems. Features
include pre-programmed formation and test profiles,
automatic calibration, cell fault detection, the
ability to sort cells and simple on-screen displays.
The Series 5000 combines the requirements of both
formation and production testing into one flexible
and easy operating system >More.
The Series 8000 is a range of
fully automated, computerized battery test systems
that provide the highest level of specifications
and features available in a Maccor test system.
The Series 8000 provides exceptional accuracy
(99.95% of Full Scale), resolution (16-bit, 1
part in 65,536) and speed (1 mS data aquisition,
available) for testing Hybrid Electric Vehicle
(HEV) batteries, Super Capacitor, and other high
power energy storage devices.>More.
|
