| |
Cellcorder
Standby Battery Test Meter
The New Cellcorder CTL-400 is the latest version
in the leading line of CellCorder battery test instruments.
Lightweight, stylish, rugged and durable. Special features
include new user-friendly operation, USB memory key, modem,
graphical reflective LCD display for better contrast, and
new cables and clamps.
Accurate Data in
a Fraction of Normal Test Time.
The intelligent,
lightweight Cellcorder cell resistance tester displays and
records cell float voltage, internal cell resistance, and
inter-cell connection resistance. Using a compatible hydrometer
such as our CTL-200 Hydrostik
Digital Data logging Hydrometer/Thermometer, you may automatically
transfer data, such as specific gravity and temperature, using
the on-board infrared port.
Use the Cellcorder on a single cell or multi cell modules.
Data is stored using a memory card that allows virtually an
unlimited amount of data storage. The memory card, IR port,
or internal modem transfer readings to a PC for analysis and
advanced report generation via the supplied software.
The high contrast, 128 x 64 pixel, backlit graphical display
shows menus and test results. A fully charged Cellcorder can
test for up to seven hours, and isolated operation helps ensure
safety and makes the Cellcorder easy to move around. Recharge
power is supplied by a wall plug adapter.
Low Cost - The
Cellcorder replaces three instruments that individually cost
as much as or more than this one instrument. Significant savings
result from taking more readings in less time and analysing
data more rapidly.
Multi Cell Capability -The Cellcorder provides readings on
either single cells or Multi cell modules.
Reliable Readings - The Cellcorder displays superior performance
even in high noise environments - without the need to disconnect
the battery from service. The instrument uses up to a 60 amp
DC load (on 2V cells) to calculate internal
cell resistance and inter-cell resistance. Circuitry rejects
the 50Hz/60Hz ripple often troublesome to AC-based impedance
and conductance meters.
The Cellcorder comes complete with memory card, USB port memory
card reader, resistance test leads, voltage test leads, carrying
case, AC charger, and data
trending and analysis software. An optional printer is
also available.
|
|
- Float Voltage Readings
The Cellcorder measures the voltage applied during full
float operation. The voltage range covers all cells or modules
up to 20 volts. Cell or module reading accuracy is to four
full digits.
- Internal Cell Resistance
The internal resistance of a cell can be determined by how
that cell responds to a momentary load. The instantaneous
voltage drop and load current applied are used to calculate
the resistance. Cellcorder algorithms make this measurement
possible on cells floating on-line or off-line.
- Inter Cell Resistance
The Cellcorder measures the resistance between two cell
terminals that are electrically connected. The measurement
consists of the connector resistance and the contact resistance
at the points of connection to the cell terminals.
- Auto Ranging
The Cellcorder automatically selects the correct voltage
range, load resistor, and time for a test.
Data Extraction and Analysis After all testing is completed;
the Cellcorder can be connected via the internal modem,
supplied Smart Card reader or infra red port to a PC or
handheld device. The data extraction program analyses test
data and displays results in a bar graph or tabulated format.
A test report may be printed or saved to a file. This file
can be exported in an ASCII or comma-delimited format to
allow off-the-shelf programs or supplied Battery
Analysis trending software to generate customized reports.
 Hardware
Specifications
 CTL-400
specifications document
If
you require further information about this product or service
please contact us here
Get
the latest Adobe Acrobat Reader®.
|
